安科瑞AHKC系列霍尔传感器在沙特某通讯公司的应用

0

Application of AHKC series Hall sensor in a communication company in Saudi Arabia 

摘要:近年来,由于电力电子器件的发展,变频调速、逆变、斩波等新技术的应用,电压、电流的波形已不再是标准的正弦波或直流。传统的互感器显然已不适于对该波形的测量。因此,很多国家都相继进行了非接触式电流电压传感器的研究开发,其中尤以霍尔电流电压传感器被视为该项技术的代表。

Abstract: In recent years, due to the development of power electronic devices and the application of new technologies such as frequency converter, inverter and chopper, the waveform of voltage and current is no longer the standard sine wave or DC. The traditional CT is obviously not suitable for the measurement of the waveform. Therefore, many countries have carried out the research and development of non-contact current and voltage sensor, especially Hall current and voltage sensor is regarded as the representative of this technology.

0.项目概述: Project Overview

沙特AFAQY公司主做通讯设备安装项目,该客户购买我司霍尔电流传感器主要安装在UPS电源柜中,以监测电流情况,保护后端设备.

Saudi Arabia AFAQY company mainly do the installation project of communication equipment. The Hall current sensor they purchased  is mainly installed in the UPS power cabinet to monitor the current situation and protect the back-end equipment.

1.AHKC系列霍尔传感器介绍 AHKC Series Hall current sensor

霍尔传感器,适用于交流、直流、脉冲等复杂信号的隔离转换,通过霍尔效应原理使变换后的信号能够直接被AD 、DSP、PLC、二次仪表等各种采集装置直接采集和接受,体积小,寿命长,安装方便,响应时间快,电流测量范围宽精度高,过载能力强,线性好,抗干扰能力强等优点。

Hall sensor is suitable for the isolation and conversion of complex signals such as AC, DC and pulse. Through the Hall effect principle, the converted signal can be directly collected and accepted by various acquisition devices such as ad, DSP, PLC and secondary instrument. It has the advantages of small volume, long service life, convenient installation, fast response time, wide current measurement range, high precision, strong overload capacity and good linearity, It has the advantages of strong anti-interference ability.

image.png


2.型号说明Model description

image.png

3.安装图片Installation picture

image.png


4.总结Summmary

在UPS电源系统中,闭环霍尔电流传感器用于测量输出电流,UPS控制器根据此电流进行反馈控制,保证逆变电源正常工作。由于其响应速度快,特别适用于计算机中的不间断电源。

In the UPS power system, the closed-loop Hall current sensor is used to measure the output current, and the ups controller carries out feedback control according to the current to ensure the normal operation of the inverter. Because of its fast response speed, it is especially suitable for uninterruptible power supply in computer.

参考文献 Bibliography

1.Solutions For Enterprise Micro-grid System 2020.02